This assembly permits the installation of a low cost NON-STOP winding post at the output side of a production line that habitually uses carriages.

This configuration is not automatic but is a positioning method that allows operators to change carriages manually in favourable conditions.

In the basic application, winding is made uniquely by contact of the press on the roll.

In numerous applications this is widely sufficient for making reels correctly.

An axial accompaniment option exists which considerably increases the performance range of this winder.

Its installation is rapid and it is a monoblock autonomous assembly.

Technical Characteristics

- Axis height of carriages 1100 mm standard, other values possible for adapting to your carriages.
- Maximum winding diameter 1500 mm standard.
- Standard table of 2500 mm.
- Maximum speed for changing carriages 30 m/min.
- Production speed > 100 m/min.
- Low tension of 2 to 20 daN.
- All fabrics.
- For certain very light qualities, we advise the axial accompaniment option.
- Manual charging.
- Alternative passage from one carriage to another by pneumatic actionner.
- Measurement for synchronisation on the production machine made by tachometric generator.
- Lateral exit of carriages (left or right).
- Pressure of cylinder press adjustable by pressure reducing valve combined with gauge.
- Standard colour RAL 5002.